Driving Hammer

Our driving hammer features a 10 oz S7 tool steel head with a 14" katolox handle. The flared wring off is beveled sharply on the bottom side to keep nail tips from hanging up. 

The head is attached to the handle by an innovative system that utilizes a special flared internal screw and a taper inside the head. This makes for a tight and quick fit up and over time when the handle becomes loose as all hammers do, all that's necessary to tighten it up is to trim the end of handle slightly and tighten down the screw. The taper in the head allows it to be tightened up instead of replaced.